USER MANUAL
NAVWATCH-S10
12 |
P a g e
SETTING A MEMO
1.
Setting a memo is much the same as setting an alarm, however in this feature,
you can select a specific date (as well as time) that an alarm will sound.
2.
From the main timer screen, press the FUNCTION button.
3.
Use the LIGHT (scroll up) or the REC (scroll down)
buttons until you see the letters MEM (Memo) appear
on the screen.
4.
Press the FUNCTION button to enter this feature.
The number 1 (one) will appear next to MEM. Toggle
between memo settings 1 and 2 using the LIGHT (scroll
up) or the REC (scroll down) buttons.
5.
Use a combination of the FUNCTION button to move
you through the memo fields and the LIGHT (scroll
up) or the REC (scroll down) buttons to adjust the
memo time values. Finally choose whether to have this
memo turned ON or OFF.
Note: If a memo is selected and turned on, a picture of a BELL
will also appear at the top of the screen.
SETTING AN HOURLY CHIME
1.
From the main time screen, press the FUNCTION
button.
2.
Use the LIGHT (scroll up) or the REC (scroll down)
buttons until you see the letters CHM (Chime
Alarm) appears on the screen.
3.
Press the FUNCTION button to enter this feature.
4.
Use the LIGHT (scroll up) or the REC (scroll down)
buttons to choose whether to have this chime turned ON or OFF.
5.
Then use the MODE button to save your settings and to return to the main time
screen.
