Industrial Cellular VPN Router NR500 Series User Manual
Page 51 / 70
Enter the negotiate port on OpenVPN server.
•
Authentication Method
Select from "X.509", "Pre-shared", "Password", and "X.509 And Password".
•
Encryption Type
Select from "BF-CBC", "DES-CBC", "DES-EDE-CBC", "DES-EDE3-CBC", "AES-128-CBC", "AES-192-CBC" and
"AES-256-CBC".
•
Username
Enter the username for authentication when selection from
“Password” or “
X.509 And Password
”.
•
Password
Enter
the password for authentication when selection from “Password” or “
X
.509 And Password”.
•
Local IP Address
Enter
the local virtual IP address when select “P2P” mode.
•
Remote IP Address
Enter
the remote virtual IP address when select “P2P” mode.
•
Local Netmask
Enter
the local netmask when select “TAP” connection type.
•
TAP Bridge
Select the specified LAN that bridge with OpenVPN tunnel when select “TAP” connection type.
•
Renegotiate Interval
Enter the renegotiate interval if connection is failed.
•
Keepalive Interval
Enter the keepalive interval to check the tunnel is active or not.
•
Keepalive Timeout
Enter the keepalive timeout, once connection is failed it will trigger the OpenVPN reconnect.
•
Fragment
Enter the fragment size, 0 means disable.
•
Private Key Password
Enter the
private key password for authentication when selection from “X.509” or “
X.509 And
P
assword”.
•
Output Verbosity Level
Enter the level of the output log and values.
