User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
Switching on the navigation device
- 19 -
Switching the navigation device to standby mode
►
Press briefly on the
(
On/Off
) key (max. 2 seconds).
A message will appear telling you that the device will be switched to
standby mode in several seconds.
►
Wait for the device to be switched to standby mode or tap on
Standby.
Automatic Standby
You can configure the navigation device so that it is automatically
switched to standby mode when not in use.
►
In the
N
AVIGATION
window tap on Options > Settings > General >
Automatic Standby.
►
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins., After 20 mins.,
After 30 mins.).
►
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
►
Press the
(
On/Off
) key and keep it pressed until the device
switches off (approx. 6 seconds)
-or-
1. Press briefly on the
(
On/Off
) key (max. 2 second).
A message will appear telling you that the device will be switched to
standby mode in several seconds.
2. Tap
on
Off.
Note:
When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly and with the window which
was active when switched off. In standby mode the device still
consumes a small amount of energy however. Depending on how full
the battery is, it can become flat within a few days or a few weeks.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.