User's manual MobileNavigator | 5
Before you begin
- 11 -
This is how you
connect the dipole
aerial
8.
Insert the jack plug of the TMC dipole aerial into the TMC
aerial connection on the left side of the device.
9.
Use the suckers to fix the aerial to the windscreen.
2.2.2
Fitting the PNA on your bike
Mount the fitting...
1.
Connect the clamp and the mounting plate . Pull the
clamp round the handle bar as represented above (opening
up, plate towards the driver). Do not forget to put the rubber
band which is included in the delivery between the handle
bar and the clamp. The clamp is flexible, so you can open it
carefully, place it round the handle bar and close it.
2.
Put the cradle of the device onto the mounting plate .
Push the holder downwards until it snaps in noticeably. Please
note that there is only one correct position for the holder to
be fitted.
3.
Fix the complete holder kit with the included screw . Fasten
the screw only slightly for the moment.
4.
Insert the device into its cradle. Verify that the clip snaps
noticeably!
5.
Turn the holder until you may read the screen well while
sitting on the bike.
6.
Fasten the screw.
Summary of Contents for MobileNavigator 5
Page 1: ...User s manual MobileNavigator 5 as on June 2006...
Page 8: ......
Page 94: ......
Page 106: ......