background image

User's manual MobileNavigator | 5 

Operating the navigation software 

- 21 -  

        

Entry 

Significance 

 

Speed 

Indicates your current speed. 

 

Position 

Indicates the address of your current 
position. 

 

Save 

Tap this button to add the current address to 
the F

AVOURITES

 

Quit 

Tap this button to quit the GPS screen. 

  

 

Energy 
The Energy icon is placed at the bottom right corner of the 
screen. The colour of the icon and the symbol displayed on it 

have the following significance:  

  
 

Colour/Symbol 

Significance 

 

 

The device is connected to an external 
power supply. The battery is charged. 
The LED on the device shines green.  

 

 

The device is connected to an external 
power supply. The battery is being 
charged. The LED on the device 

shines red. 

 

 

The device is being supplied by its 
internal battery. The charge state of 
the battery is sufficient. 

The number of green segments on the 
battery indicates its charge state (2 or 

3 segments).  

 

 

The device is being supplied by its 
internal battery. The charge state of 

the battery is weak. 
The number of green segments on the 

battery indicates its charge state (0 or 
1 segment). 

A message window informs you when 
the charge state of the battery 

becomes insufficient.  

 

 

Switching the GPS receiver on / off  
The GPS receiver consumes energy. This is of significance when 
the system is operated in battery mode, e.g. when you are on 

your way on foot or by bike. Switch therefore the GPS receiver 
off when you do not need it for a certain time. 
1.

 

Tap the Energy icon on the lower right corner of any screen. 
The E

NERGY

 screen opens: 

Summary of Contents for MobileNavigator 5













































































































Reviews: