background image

User's manual MobileNavigator | 5 

Useful functions for navigation 

- 87 -  

7.2

 

Next destination 

 

This function is only available in "Extended mode".  
For information on how to change the user mode, please refer to 

"Changing the user mode", page 28. 

 

Next destination 

Next destination 
This function is only available when you are navigating a route 
with at least one stage point and when you are working in 

extended mode. 
Use this function if you want to skip the next stage point. 
Example: You have planned an itinerary from your office to 
"Company A" and then to "Company B" and you are already on 

your way. Before you arrive at "Company A", a mobile phone call 
informs you that you need not visit Company A. 
Tap the Next destination button to navigate to the stage point 
after the next (here: "Company B"). 
The system recalculates the route. "Company B" will be your next 

destination. 

 

7.3

 

Blocking a route section 

Blocking a route 

section manually 

You may block a route section manually in order to evade it. 

Manual blocking forces a recalculation of the route.  
Presume that you are driving on a freeway and a radio message 

announces a traffic jam 4 miles ahead of your current position. 
With the "Block route sections" function you may instruct the 

navigation system to evade the announced traffic jam. 

 

A manual blocking is only valid for the current navigation 

process. The respective route section will be unblocked for the 
next navigation or when you restart the software. 

  

Blocking a route 
section… 

Precondition: The navigation system is in navigation mode and 

the map is being displayed.  

 

1.

 

Tap short on any place on the map. 

2.

 

Tap Block road

 

The B

LOCKING

 screen opens. 

 

2.

 

Enter how many miles (from your current position on) you 
want to block. 

3.

 

Tap OK

Summary of Contents for MobileNavigator 5













































































































Reviews: