User’s manual NAVIGON Primo
- 42 -
Working with the map
- or -
You have planned or loaded a route and tapped on Show Route.
The map opens in
Preview
mode.
1
The current position is indicated (orange arrow).
If you display a planned or loaded route and the specified starting point
is not your current location, then it is possible that your current position
will not be shown on the preview.
2
The route is marked orange.
3
The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
In the case of a multi-leg route, the distance and the estimated driving
time for each leg are displayed.
4
The current route profile is indicated on the
(Route Profile) button.
The symbol illustrates the mode of transport on which the profile is
based. (Refer to "Route profiles" on page 49)
5
For the route shown there is a button on which the estimated time of
arrival, the total distance and the estimated duration are presented.
►
Tap on this button to start navigation.
►
Tap on the
(Route Profile) button (refer to the figure, point 4)
in order to select a different route profile.
If you display a planned or loaded route, the route may be
recalculated. The starting point for the calculation will now be your
current location. You will first be guided to the first route point
entered.
►
Tap on Options > Turn-by-Turn List to view detailed directions for
the route. (Refer to "Turn-by-Turn List" on page 55)