2. Starting operation
2.1. USB connection
Connect the USB receiver to a free USB port of your notebook etc.. The NL-650US will be
recognized by your Windows OS and your system will try to install a driver. Cancel this
operation and start the respective installation from the CD ROM under the menu driver. Follow
the instructions of the installation. After the installation is finished please re-start your system.
Afterwards the GPS COM port will be available under ports in the device manager. Please set
this port in your navigation- or routeplanner software. Please do not use any other program at
the same time, which accesses this port.
3. LED
• lights down:
OFF
• lights up:
ON without satfix searching
• lights flash:,
ON with satfix
4. Application Environment
The NL-
650
US can be used as GPS receiver under Windows Vista/7
/
8/8.1, Linux RedHat
7.3, 8, 9, MacOS 8, 9 and 10. You can use it also with any device with Android 3.2 and above
that support OTG feature. Please search the App ”PL2303 USB-UART” from Prolific
Technology Inc. and install it.
SKY
LED red
