Navini Networks, Inc.
Ripwave-MX Modem User Guide
Installing the
MX Modem
ee, also, Addendum 1)
wing instructions are for the installation of the LMX
L
(S
The follo
Modem. Please read all instructions before attempting the
installation. It is advisable to turn off the computer and the LMX
Modem before performing the installation.
Step Action
Illustration
1.
Connect the Ethernet
cable to the Ethernet
port on the computer.
2.
Connect the other end of
the Ethernet cable to the
LMX Modem.
3.
Connect the AC power
adapter to the LMX
Modem. Plug the other
end into a 110/220 VAC
60/50 Hz outlet.
CAUTION!
Only use
the AC power adapter
specifically supplied
with the LMX Modem.
Using any other adapter
may cause damage to
the Modem.
Connection for
Ethernet cable
Connection for
Ethernet cable
Connection for
Power Adapter
Connection for
Power Adapter
10
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
