3-2
Raychart 425 Chartplotter
Up menu, as described in Chapter 4. The waypoint is added to the
waypoint list and named with the next available number. The edit
functions can be used to change the symbol and name. When the cursor is
positioned over a waypoint, the waypoint bearing and range are
displayed.
Waypoints can also be transferred between the chartplotter, other NMEA
connected instruments or a PC, using the Waypoint Transfer functions.
This section explains how to perform the following tasks using the
on-screen cursor and the waypoint list:
•
Placing a Waypoint
•
Selecting a Waypoint
•
Displaying Waypoint data
•
Editing a Waypoint (symbol, name & position)
•
Erasing a Waypoint
•
Moving a Waypoint
Placing a Waypoint
Note: It is not possible to place multiple waypoints at the same position.
➤
To place a new waypoint:
1. From chart mode, press
ENTER
; the primary function bar is displayed
(Figure 3-1):
Figure 3-1: Primary Function Bar
2. Using trackpad left/right, select
WAYPOINTS
(Figure 3-2).
Figure 3-2: Waypoints Soft Keys
3. To place a waypoint at the cursor position:
i. Select
PLACE WPT AT CURSOR
. The selected function now has help
text appended to it (Figure 3-3):
Figure 3-3: Place Waypoint Function
PLACE
WAYPOINT
MOVE CURSOR, "ENTER"TO PLACE
WAYPOINT, "CLEAR" TO QUIT
Summary of Contents for Raychart 425
