XX:XX is a time of disarming, will come
COM12 PASS,SIM
Переключить на другую СИМ
PASS – is a current password set in the device. Factory default value
is 1234.
SIM– a number of the СИМ card, to which the device shall be
switched.
EXAMPLE: COM12 1234,2 – switch to the second SIM card.
After the command is executed the confirmation “Switch to SIM 2”
will come
COM13 PASS,SIM,APN,LOGIN,PASS2#
Switch to other APN СИМ cards
PASS – is a current password set in the device. Factory default value
is 1234.
SIM– a number of the SIM card.
APN – provider’s APN.
LOGIN – user name.
PASS2 – user password.
The line must always end with # (pound).
EXAMPLE: COM13 1234,1,myinternet,login,pass# – write down the
APN parameters for the first СИМ card.
After the command is executed the confirmation “APN update” will
come
COM14 PASS
Inquire of the i-button key list
PASS – is a current password set in the device. Factory default value
is 1234.
EXAMPLE: COM14 1234
After the command is executed the confirmation “Keys:
0014250d0a0c 254d6b789d3c” will come
COM15 PASS,KEY
Add a key code
PASS – is a current password set in the device. Factory default value
is 1234.
KEY – a key code value in hexadecimal form
EXAMPLE: COM15 1234,0d0a1023475f
After the command is executed the confirmation “Key added” will
come
COM16 PASS,CAM,RECEIVER
Make a picture with the camera
PASS – is a current password set in the device. Factory default value
is 1234.
CAM – a number of the camera, 1 or 2.
RECEIVER – an image sensor: 0 – to the SD card, 1 – to the server
EXAMPLE: COM16 1234,1,1 – inquire of a picture from the camera 1
and sent it to the server
After the command is executed the confirmation “Camera1: get
picture” will come
COM17 PASS,NUMOP
Change the operator in roaming
PASS – is a current password set in the device. Factory default value
is 1234.
NUMOP – an index of the operator of the terminal memory from 1
to 5
EXAMPLE: COM17 1234,2 - switch to work with the second
operator.
After the command is executed the confirmation Operator set to 2
will come
COM18 PASS
Check the list of the "connection" numbers
PASS – is a current password set in the device. Factory default value
is 1234.
EXAMPLE: COM18 1234
After the command is executed the confirmation “Numbers:
+79071211234” will come
COM19 PASS,NUMIND,NUMBER#
Change the «connection» telephone number
PASS – is a current password set in the device. Factory default value
is1234.
NUMIND – an index of the "connection" number , 1 or 2
NUMBER – a text of the phone number. It must end with # (pound).
EXAMPLE: COM19 1234,1, + 71234568574 # - change the
connection number 1.
After the command is executed the confirmation “Number 1
changed” will come
COM20 PASS,MARSHRUT#
Change the working route of the announcement
service
PASS – is a current password set in the device. Factory default value
is 1234.
MARSHRUT – text name of the route, the file with such name must
be recorded on the SD card. Must end with # (pound).
EXAMPLE: COM20 1234,marsh25#
After the command is executed the confirmation “Current marshrut:
marsh25” will come
If you send an SMS
COM20 1234,?
A current route will come in return.
COM21 PASS,F,H,MINSP,MAXSP,D,A,T,S
Set the filtration parameters
PASS – is a current password set in the device. Factory default value
is 1234.
F – filtration: 0 - off, 1 - on
H - filter hdop (horizontal accuracy 0 - 25)
MINSP - the minimum rate of the filter (0 - 255)
MaxSP - the maximum rate of the filter (0 - 255)
D - jump of the coordinates for 1 sec. (0 -255)
A - the maximum acceleration (0 - 25)
The T - the minimum recording interval (0 - 255)
S - the minimum number of satellites(0 - 255)
