7.2.9.
THE «GEOFENCES» PANEL
Geofences are made on the basis of an outoinformer, but are used only in the events and in the
operation of transceivers. Event of presence in geofence is called "Geofence List". To enable the transceiver to
work in geofences select a number of geofance list from the list on the panel "Communication" - "Modification
Parameters" in the drop-down list "enable working".
Geofences are divided into groups (List 1 - List 8), each can contain up to 8 circular geofences.
An event or appointment to a job in geofences is set for the entire list.
Parameters are specified for each geofences list (5 seconds on default, 1 ... 255 seconds range ):
- Time of reaction to the input - default is 5 seconds (1 ... 255sec range)
- Time of reaction to the output- the default 10 seconds ( 1 ... 255sec range)
Dynamic geofence is used to control the displacement of the object beyond the radius specified by the
user. The output checks are performed at predetermined time intervals. If the object left the dynamic geofence,
update is made and the center is transferred to the current coordinates.
This geofence with radii created by the user, is formed automatically when the first valid coordinates
appear. When going out from the geofences, the event "Out of the din. geo-fence ", is generated which can be
used at the user's discretion.
7.2.10.
THE «CLOUD» PANEL
The configurator program allows you to upload settings (configuration) of the device to the cloud
service. This function is very useful to remotely configure or to set up a large number of devices without a
connection to a PC.
The function is available if the computer, on which the program configurator is open, has the Internet
connection.
The "Send the configuration to the cloud" button works only when the device is directly connected to
a PC and the identified IMEI of the device. When clicking the configurator program connects to the Naviset
configuration server and saves all the configuration data.
The "Download the configuration from the clouds" button loads the configuration stored on the
server. If the device is not connected to the PC, it is necessary to enter the device IMEI in the GSM IMEI field
manually before the operation. If it is not connected, IMEI must be considered automatically.
For remote configuring of a large number of devices, you can use the "Send the list to the cloud"
function. To do this in the "IMEI list" field enter the IMEI numbers for which this configuration will be uploaded
on the server and press the "Send list to the cloud" button. This function should be used in the initial
configuration of devices because if there is no configuration when power is on, it automatically turns to the
Cloud of configurations and if it is available on the server it loads.
The remote configuration can also be performed on command from the server or SMS command. For
details, see Control of the device by SMS commands. The commands from the server via GPRS are sent textually
and fully correspond the commands via GPRS.
