Disable Direct Hazards (cont.)
Turn Off the High-Voltage Disconnect Switch
Figure 16.
High-Voltage Disconnect Location
1.
High-Voltage Disconnect cover
2.
High-Voltage Disconnect Switch (OFF position)
WARNING: To prevent personal injury and / or death, ALWAYS REMEMBER the High-Voltage
Disconnect Switch only disables the vehicle’s high-voltage system.
The High-Voltage Disconnect
Switch does NOT turn OFF the voltage in the S-box, the high-voltage batteries, and the cables
between these items. The vehicle 12 volt system could still be energized. ALWAYS turn OFF both the
High-Voltage Disconnect switch and the 12 Volt Battery Disconnect Switch whenever interacting with
a damaged vehicle. NEVER touch ORANGE cables without wearing appropriate Personal Protection
Equipment (PPE).
1.
Open the high-voltage service disconnect switch cover (Figure 16, Item 1). The cover has a lock. In
emergency and if keys not available open by force.
2.
Turn the BLACK high-voltage service disconnect switch to OFF position (Figure 16 Item 2).
3.
Lock the switch with a padlock to avoid anyone from turning it back ON.
Components in high-voltage zone 2 and high-voltage zone 3 remain live after the high-voltage disconnect switch
is turned OFF. These zones are located entirely between the frame rails on the underside of the vehicle and are
labeled as indicated in Figure 2 and Figure 3.
4328785R1
16
© 2021 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners.
