SECTION 5 – MAINTENANCE SCHEDULE AND SERVICE PROCEDURES
Service Procedures (cont.)
ENGINE OIL AND FILTER (cont.)
2.
Run engine until operating temperature is reached, then shut
down the engine.
GOVERNMENT
REGULATION:
Engine
fluids
(oil, fuel, and coolant) may be a hazard to human
health and the environment.
Handle all fluids and
other contaminated materials (e.g.
filters, rags) in
accordance with applicable regulations.
Recycle
or dispose of engine fluids,
filters,
and other
contaminated
materials
according
to
applicable
regulations.
WARNING: To prevent personal injury or death, wear
protective clothing when draining hot oil.
WARNING: To prevent personal injury or death, do not
let engine fluids stay on your skin. Clean skin and nails
using hand cleaner and wash with soap and water. Wash or
discard clothing and rags contaminated with engine fluids.
3.
Place a drain pan under the oil pan drain plug, remove oil
pan drain plug and drain oil.
4.
Inspect the oil pan drain plug and seal, if they are free of
defects, they can be reused. Replace if necessary.
5.
Using clean engine oil, liberally lubricate the oil pan drain
plug seal.
6.
Install oil pan drain plug and tighten to 18 lb·ft (25 N·m).
7.
Recycle or dispose of oil according to applicable regulations.
8.
Put drain pan under oil filter.
9.
Remove oil filter and recycle or dispose of according to
applicable regulations.
10. Lubricate new oil filter gasket with clean engine oil.
CAUTION:
To prevent engine damage, install the correct oil filter
for the engine application.
11. Install new oil filter.
CAUTION:
To prevent engine damage, do not overtighten oil
filter.
12. Hand tighten oil filter 3/4 to 1 full turn after gasket first
contacts oil filter header.
Page 74
Summary of Contents for MaxxForce 7
