Maintenance Instructions
WARNING
To prevent property damage, personal injury,
and / or death, take care when performing any
maintenance or making any check or repair.
Some of the materials in this vehicle may also
be hazardous if used, serviced, or handled
improperly. If you have any questions pertaining
to the service, have the work done by a skilled
technician.
WARNING
To prevent property damage, personal injury, and
/ or death, when servicing the vehicle, park on a
flat level surface, set the parking brake, turn off
the engine, and install wheel chocks.
WARNING
To prevent property damage, personal injury,
and / or death, always disconnect the ground
battery terminal first, then the positive cable.
When reconnecting the battery cables, connect
the positive cables first, and then reconnect the
negative cables. Failure to follow this warning
may result in a direct battery short which is a fire
or explosion hazard.
CAUTION
To prevent damage to electrical components
during electric welding operations, follow these
cautions: Prior to electric welding, disconnect
any negative and positive battery cables that
connect the batteries to the vehicle.
Be sure
the detached connectors are not touching
the vehicle.
If welding close to an electronic
component, temporarily remove that component.
Attach the welder ground cable as close as
possible to the part being welded.
When servicing your vehicle, always:
1.
Turn off the ignition switch, unless the procedure calls for a
running engine.
2.
Set the parking brake and install wheel chocks.
3.
Use support stands, not a jack, whenever you must be under
a raised vehicle.
4.
Do not smoke.
5.
Wear safety glasses for eye protection.
6.
Operate engine only in a well-ventilated area.
7.
Do not work on brakes or clutch unless proper precautions
are taken to avoid inhaling friction material dust.
8.
Do not wear loose clothing, hanging jewelry, watches, or
rings. Tie up long hair and avoid rotating machinery.
9.
Avoid contact with hot metal parts; allow hot components to
cool before working on them.
202
Summary of Contents for ProStar+
