manualshive.com logo in svg

Navistar ProStar+, Operation And Maintenance Manual

The Navistar ProStar+ Operation And Maintenance Manual is a comprehensive guide for effectively operating and maintaining your vehicle. This manual covers all essential information needed to ensure optimal performance and longevity of your ProStar+. Download it for free from 88.208.23.73:8080 and keep your truck running smoothly.

Share
Download
background image

Index

T

(CONT.)

Television Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Terminal Inspection-Cleaning-Corrosion Protection. . . . . . . . . .217
Three-Position Regeneration Inhibit Switch. . . . . . . . . . . . . . . . . . .182
Tightening Steering Intermediate Shaft Joint Bolts. . . . . . . . . . .234
Tire Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Checking Inflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237
Underinflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Tire Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
Tire Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235
Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235

Dual Tires Matching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Dual Tires Mixing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238
Loads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238
Rotation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239

Rotation Is Advisable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Tire Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

SmartWave

®

Tire Pressure Monitoring System (TPMS). . .237

Tire Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Checking Inflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237
Underinflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

Tire Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235
Use of Tire Chains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241
Wear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

Irregular Wear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

Wheel and Tire Balancing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

Torque Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266

Disc Wheel Nut Torque Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
U-Bolt Nut Torque Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266

Tow Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
Tower Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Towing Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

T

(CONT.)

Towing Instructions (cont.)

Tow Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
Towing Vehicle With Front Wheels Suspended. . . . . . . . . . . . .195
Towing Vehicle With Rear Wheels Suspended. . . . . . . . . . . . .196
Towing Vehicles With Driver Controlled Differential Lock. . .195

Installing Axle Shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Removing Axle Shafts Before Towing. . . . . . . . . . . . . . . . . . . . .195

Towing Vehicle With Front Wheels Suspended. . . . . . . . . . . . . . .195
Towing Vehicle With Rear Wheels Suspended. . . . . . . . . . . . . . . .196
Towing Vehicles With Driver Controlled Differential Lock. . . .195

Installing Axle Shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Removing Axle Shafts Before Towing. . . . . . . . . . . . . . . . . . . . . . .195

Tractor Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Cab Interior Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Exterior Lights Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Fifth Wheel and Coupling Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Front of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Left Engine Compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Left Front of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Left Rear of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Left Side Cab Area (for Vehicles Equipped with Selective

Catalytic Reduction (SCR) System). . . . . . . . . . . . . . . . . . . . . . . . . .30

Left Side Cab Area (for Vehicles Not Equipped with Selective

Catalytic Reduction (SCR) System). . . . . . . . . . . . . . . . . . . . . . . . . .29

Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Rear of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Right Engine Compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Right Front of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Right Rear of Tractor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Right Side of Cab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Right Side Under Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Tractor-Trailer Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197

290

Summary of Contents for ProStar+

















































































































































































































































































































Reviews:

No comments

Related manuals for ProStar+

U-Line Big Joe H-4709 Manual preview
Big Joe H-4709
Brand: U-Line Pages: 4
Chevrolet 6500XD 2022 Owner'S Manual preview
6500XD 2022
Brand: Chevrolet Pages: 312
DAF CF65 Manual preview
CF65
Brand: DAF Pages: 504
Kalmar Ottawa Operator'S Manual preview
Ottawa
Brand: Kalmar Pages: 59
Winget 2B1500 Operators Handbook & Parts preview
2B1500
Brand: Winget Pages: 170
Mortuary Lift Stepper ERGO Operator'S Manual preview
Stepper ERGO
Brand: Mortuary Lift Pages: 33

Brands by name

Popular brands

Load more brands