Model Description
WARNING
To prevent property damage, personal injury,
and / or death, never put any part of your body
beneath a raised hood unless the hood is all the
way forward in its range of motion and is fully
settled in the over center position.
CAUTION
To prevent damage to the windshield wipers,
return them to their normal position before
opening or closing hood.
CAUTION
To prevent damage to the hood and / or painted
surfaces, use the following procedure.
NOTE: To avoid pinching, do not lift or lower the hood from
the side.
1.
Before opening the hood make sure that there is enough
room in front of the vehicle for the hood to open completely
without pinning or pinching yourself between the hood and
any other structures.
2.
Release the latches on both sides of the cowl.
3.
With both feet firmly on the ground, grasp the hood handle,
pull the hood forward over center, and allow it to settle into
the raised position.
4.
Make certain that the hood restraining shock is fully
extended before releasing hood.
Lowering the Hood
1.
Make sure that the hood has no tools, parts, or people in its
path of motion.
2.
Place both hands on the top edge of the grille, push the
hood backward over center, and allow it to settle into lowered
position.
3.
Engage hood latches at both sides of cowl.
22
Summary of Contents for ProStar+
