manualshive.com logo in svg

Navistar ProStar+, Operation And Maintenance Manual

The Navistar ProStar+ Operation And Maintenance Manual is a comprehensive guide for effectively operating and maintaining your vehicle. This manual covers all essential information needed to ensure optimal performance and longevity of your ProStar+. Download it for free from 88.208.23.73:8080 and keep your truck running smoothly.

Share
Download
background image

Table of Contents

Bendix

®

Wingman

®

Fusion

®

System. . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Bendix

®

Driver Interface Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Meritor Wabco

®

OnGuard™ Collision Safety System. . . . . . . . .104

Driver Reward. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Section 5 – Sleeper Features

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Main Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Dome Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Reading Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Floor Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Accent Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Sleeper Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Accent Light Dimmer Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Accent Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Sleeper Dome / Floor Light Switch. . . . . . . . . . . . . . . . . . . . . . . . .111
Engine Control Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Auto Start / Stop System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Manual Climate Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
No-Idle Heating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Power Receptacle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Radio Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Remote Power Inverter Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Bunk Restraint System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Adjustable Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

Restraint Webbing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

Lower Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Upper Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Entering the Upper Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Exiting the Upper Bunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Cabinets / Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

Refrigerator Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Horizontal Refrigerator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Dresser Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Tower Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Rear Wardrobe Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Airline Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

Convenience Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Sleeper Curtain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Television Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Power Inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Power Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Floor Covering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Sleeper Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

Section 6 – Operation

Operation Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Cab Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

Seat Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

iii

Summary of Contents for ProStar+

















































































































































































































































































































Reviews:

No comments

Related manuals for ProStar+

Paccar Peterbilt 520EV 2022 Operator'S Manual preview
Peterbilt 520EV 2022
Brand: Paccar Pages: 45
BT SSE135 Operator'S Manual preview
SSE135
Brand: BT Pages: 82
Taylor-Dunn 212037 Operator'S Manual preview
212037
Brand: Taylor-Dunn Pages: 52

Brands by name

Popular brands

Load more brands