9
Installation and Operation
Due to transportation, the image position might shift
from the factory setting.
To correct this shift:
1. Remove two plugs as shown in the figure below.
2. Using a Phillips screw driver, rotate screw #1 to
adjust the vertical position and screw #2 to adjust the
horizontal position.
3. Replace the hole plugs.
Composite Video
Standard video image quality, fine for showing pictures
of objects on a TV monitor.
Y/C (also known as S-video and S-VHS)
Improved resolution that is less grainy due to the
elimination of dot crawl. Better for presentation of text
and graphic slides, since words are more defined.
Adjustment of
the Slide Position
on the Monitor
Understanding
Which Video
Input is Best
for You
Do Not Remove Lower Plug
123456
123456
123456
123456
123456
123456
Adjustment for
Horizontal Movement
Screw #2
Adjustment for
Vertical Movement
Screw #1
Summary of Contents for VideoMate 2300
Page 1: ...VIDEOMATE 2300 Video Slide Projector Instruction Manual The World Leader in Image Quality...
Page 4: ...VideoMate Slide to Video Introduction to the VideoMate 3 Output to Video Equipment...
Page 5: ...4 System Diagrams Top View Side View...
