EN
NAVITEL AIR 15 AL
| 13
Tire inflation
1. Connect the air hose to the compressor and tire.
2. Hold the power button to turn on the compressor. The display will show the
current tire pressure.
3. Press the mode switch button repeatedly to select one of the preset
compressor operating modes.
4. Hold the mode switch button to enter the pressure unit change mode, at
this moment the current unit of measurement on the display should flash.
Next, press the mode switch button repeatedly to select the desired pressure
unit. To increase or decrease the value of pressure required, use the preasure
increase and decrease buttons, respectively. When the pressure value is set,
the current tire pressure indicator should flash 3 times, and then "0" will be
displayed in all digits of the indicator.
5. Press the power button to start the tire inflation. This process will
automatically stop when the set tire pressure is reached. To stop the tire
inflation before it finishes automatically, press the power button.
6. Hold the power button to turn the compressor off. The compressor
automatically shuts down after 90 seconds of inactivity.
Note:
•
The compressor has an overheating protection system. When the compressor
temperature becomes too high, it will stop working. Wait for a while for the
compressor to cool down before further use.
•
Do not touch the metal surface of the air hose while the compressor is
running to avoid burns.
Summary of Contents for AIR 15 AL
