Navitel N500 MAGNETIC, User Manual

USING DEVICE — NAVITEL N500 MAGNETIC 

 |  15

EN

13. The device takes its power from the built-in Li-Pol battery, 

which can explode or release toxic substances if exploited in 

an inappropriate way. Do not subject the device to physical 

impact nor use it close to explosive liquids or gases.

14. Ensure normal ventilation conditions for the power adapter 

during charging since a lot of heat is released in the process. 

Do not cover the adapter with paper or other objects that may 

worsen ventilation.

15. Do not apply too much force when cleaning the display and 

other parts of the device. Do not use paper napkins or any hard 

material that can scratch the device for cleaning. Use soft cloth 

only.

16. Permissible ambient temperature in operating mode: 0 to +35 

°С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 

90% without condensation (25 °С).

Using Device in Vehicle

Windscreen holder and battery charger are delivered as part of 

the product package.

Windscreen holder

ATTENTION! Carefully select a place to attach the holder. Do 

not attach the holder to the windscreen in a way that limits the 

driver’s line of sight. If the car windscreen contains a built-in 

heating system or UV protection, the quality of signal reception 

may be lower than usual.

Setting up the windscreen holder

First remove the protective layer from the vacuum cup. Then, 

select an appropriate place to attach the holder. Make sure 

the area is clear of dust, dirt, and moisture, and then secure 

the vacuum cup on the windscreen. Put the charger cable into 

the holder. Connect navigator to the holder. Magnetic holder 

secures reliable attachment of the device.
When connected, the device automatically turns on. If 

necessary, the device can be easily detached, without removing 

the holder. After disconnection, device will automatically turn 

off after 15 seconds..