21
EN
9. LIGHT SIGNALS TABLE
LED
BEEP
STATUS
FREQUENCY
EXPLANATION
White+red
Yes
On
1s
Bioreader has been connected to power and initializes.
White
No
On
---
Bioreader is in standby mode, waiting for a fingerprint or trig-
gering of any function.
White
Yes
On
Continuously
10 s
The function of adding the remote control is on, press any
button on the remote.
White
No
Flashing quickly
---
Bioreader is waiting for choosing a relay; for the relay #1 press
button A, for the relay #2 press button B, for both relays press
button C.
White
No
Flashing slowly
Until timeout
Bioreader is waiting for an administrator’s finger
(administrator enrol, add user, or delete the entire fingerprint
database).
Green
Yes
Flashing
1 x 1s
•
The administrator or user was identified.
•
The administrator’s or user’s fingerprint was successfully
stored in the database.
White
No
Off
---
•
In strong light the white LED is not visible.
•
Device malfunction.
Red
Yes
Flashing
Continuously
Device malfunction.
Red
Yes
Flashing
3 x
•
The administrator or user was not identified.
•
The fingerprint was not stored in the database.
•
Timeout of a function.
Red
Yes
On
3 s
Fingerprint database is full.
Green+white
No
Flashing
alternately
Until timeout
Bioreader is waiting for a user's fingerprint
(enrol user finger function).
Green+red
Yes
Flashing
simultaneously
3 x
Bioreader has successfully deleted user finger.
Green+red
No
Flashing
alternately
Until timeout
Bioreader is waiting for a user fingerprint
(delete user finger function).
White+red
No
Flashing
alternately
Until timeout
Bioreader is waiting for an administrator fingerprint
(to delete the entire database).
White+red
Yes
Flashing
simultaneously
5 x
Bioreader has successfully deleted the entire fingerprint da-
tabase.
10. MAINTENANCE
From time to time, a fingerprint reader should be wiped clean with a dry or slightly damp cloth; apart from that it does not need
special maintenance.
A dirty fingerprint reader can cause problems with the recognition of fingerprints!
Never clean with aggressive cleaners, polishing pastes or acids! Cleaning or scrubbing of fingerprint reader’s surface
with hard and sharp objects can result in damaged reader or device malfunction and, consequently, the loss of warranty
entitlement.
Summary of Contents for Bioreader
Page 1: ...USER MANUAL...