NAVMAN
8120/8084
Installation and Operation Manual
29
6-1 Waypoints window
To go to the waypoints window, press
DISPLAY
,
select
More
, then select
Waypoints
.
The waypoints window is a list of the
waypoints that have been entered, each
with waypoint symbol, name, latitude and
longitude, distance and bearing from the
boat, type and display option.
If there are more waypoints than will fit on
the window, press or to scroll up or
down a page at a time.
6-2-1 Creating a new waypoint
Creating and editing a new waypoint from
the chart window
1 To create a waypoint at the boat position,
press
ESC
to switch the chart to centre on
boat mode.
Or, to create a waypoint at a different
point, move the cursor to that point on the
chart.
2 Press
ENTER
.
3 A new waypoint, with the default name
and data is created.
4 Change the waypoint data if necessary
(see section 6-2-7).
Creating a new waypoint from the
waypoints window
1 In the waypoints window, press
MENU
and
select
Create
.
2 A new waypoint, with a default name and
data, is created at the boat position.
3 Change the waypoint data if necessary
(see section 6-2-7).
Note:
Waypoints can also be created when a
route is created (see section 6-2-1).
6-2-2 Moving a waypoint
Moving a waypoint from the chart window
1 In the chart window, move the cursor to
the waypoint to move.
2 Press
MENU
and select
Move
.
3 Move the cursor to the new position and
press
ENTER
.
Moving a waypoint from the waypoints
window
To move a waypoint from the waypoints
window, edit the waypoint (see section 6-2-3)
and change the latitude and longitude.
6-2-3 Editing a waypoint
Editing a waypoint from the chart window
1 In the chart window, move the cursor to
the waypoint to edit.
2 When the waypoint data is displayed,
press
ENTER
.
3 Change the waypoint data
(see section 6-2-7).
6-2 Managing waypoints
!
WARNING
Do not create a navigation waypoint on
land or in dangerous water.
