FISH 4350 / 4380
Installation and Operation Manual
21
NAVMAN
5-6 Data display
To show the Data display, select
Data
and press . The data
display shows a graph of the water temperature and depth over
time and other selected data items.
The graph is useful for locating warm and cold spots in
the water.
Refer to section 3-4 Setup > Data to change the displayed
data items and temperature graph time base. To change
units, refer to section 3-7 Setup > Units.
time base
(Select from 5 minutes to 2 hours)
Correct installation is critical to the performance of the FISH 4350 and FISH 4380. There are two
components to install, the display unit and the transducer. It is vital to read the entire installation
section of this manual before attempting to install the components.
6 Installation and Maintenance
6-1 What comes with this product?
Standard con
Þ
guration:
•
FISH 4350 or FISH 4380 display unit
•
Power cable*
•
Mounting bracket (screws included)
•
Warranty registration card
•
This manual
•
Sun cover for display unit
•
Flush mounting kit*
•
Transom transducer (includes cable kit and screws)
•
Transom Mount Transducer Installation Manual.
* denotes FISH 4380 only.
•
TRACKER series of chartplotters
•
Through hull depth transducer
•
Through hull speed/temperature transducer*
•
Fuel
ß
ow kit (single or twin engine)*
•
Replacement paddle wheel*
•
Carry bag
•
REPEAT 3100 (see section 6-5 Systems of
several instruments).
Please consult your Navman dealer for more
information. * denotes FISH 4380 only
TRACKER 5500
chartplotter
Fuel
ß
ow kit
6-2 Options and Accessories
Display unit
Screws
Power cable
Mounting bracket
Transom transducer
6-3 Mounting and removing the display unit
There are two mounting arrangements:
•
Flush mounting
requires a solid panel
with access behind for wiring and mounting
screws. After
ß
ush mounting, the FISH 4350
and FISH 4380 cannot be tilted or moved
after installation to reduce any unwanted
glare or re
ß
ections. Carefully select the best
viewing position before installation. This
