G-PILOT 3100
Operation Manual
NAVMAN
20
Manually steer the boat to open waters. Start the GPS navigating to a waypoint, either a waypoint
on a route or a single waypoint.
BRG (direction
of GPS course)
GPS plotted
course to a
waypoint
Boat
heading
XTE (distance to
GPS course)
When the G-PILOT is engaged, if the XTE is more than 0.05 nm
or the boat heading is not within 30° of BRG then the G-PILOT
displays TRK ERROR. Press
ESC
to return to
Compass
mode
or press
ENT
to have the G-PILOT steer the boat to the course.
When the G-PILOT is engaged, it uses data from the GPS
to steer the boat along the plotted course to the waypoint.
GPS
plotted
course
HANDSTEER:
Steer the boat manually. Display CTS in
the info data or course error in the bar data
and use these to steer by.
AUTO:
The G-PILOT steers the boat automatically.
To engage AUTO,
hold
AUTO
To engage HAND STEER,
hold
AUTO
+
MENU
5-2 Engaging and disengaging the G-PILOT 3100 in GPS mode
To disengage the G-PILOT, press
AUTO
The G-PILOT returns to STBY (standby).
Steer the boat manually.
Summary of Contents for G-PILOT 3100
Page 2: ......
Page 35: ......
Page 36: ...G PILOT 3100 Operation NAVMAN Made in New Zealand MN0000213E Lon 174 44 535 E Lat 36 48 404 S...
