9
iCN 510
| User Manual
4. Turning your iCN On and Off
The fi rst time you use the iCN you will need to switch the
Battery Switch
on the back of the iCN to
ON
. Switch the
Battery Switch
to
OFF
if you are not going to be using the iCN for a period of time, as this will save battery power.
Use the
Power
button to turn your iCN on and off during normal use. When it is off, your iCN enters a suspended state
Power
Power
and the system stops operating. When you turn your iCN on, it returns to the screen you were last viewing.
Turn iCN On
1. Ensure that the memory card is inserted in the SD/MMC slot.
2. Gently pull the bottom of the GPS receiver away from the iCN. The
receiver will lift out to a horizontal position to allow it to obtain a GPS fi x.
3. Use the stylus to switch the
Battery Switch
to
ON
.
4. Press the
Power
button.
Power
Power
Turn iCN Off
Press the
Power
button. The iCN will enter suspend state and the screen will shut down.
Power
Power
If you are not going to be using the iCN for a period of time, remove it from the suction mount bracket if necessary,
and gently push the GPS receiver back towards the iCN. The receiver will click in to place. Switch the
Battery
Switch
to
OFF
.
Reset iCN
Normally you do not need to reset your iCN, however should your iCN not turn on or not respond, you can reset it to
solve the problem.
To reset your iCN, either:
a. Press and hold the
Home
button. The message
Reset Device?
will display. Tap
Yes
.
b. Use the stylus to press the
Reset
button on the top of the iCN.
