1 Installation and Troubleshooting Guide
32
1.13.4 Qube is reporting to AVL2 but displays “Power up + Ignition On” icons.
This condition is most likely caused by improper connections of the Qube’s power wires to
vehicle circuits. The installer may have connected the co12V wire or the ground wire
from the Qube’s power harness to a switched source in vehicle. In some cases, the constant
+12V and the ignition wires are connected in reverse.
Use mutimeter to verify wiring connections to Qube’s co12V, ignition and ground wires.
NOTE:
during initial installation, improper power/ignition wire connections may prevent the
Qube from waking up/coming online)
1.13.5 Qube is reporting to AVL2 but does not have any “Ignition Off” events.
This condition is most likely caused by improper connections of the Qube’s power wires to
vehicle circuits. The installer may have connected the ignition wire from the Qube’s power har-
ness to a co12v source in vehicle.
Use mutimeter to verify wiring connections to Qube’s co12V, ignition and ground wires.
1.13.6 Qube is reporting to AVL2 but has multiple “Ignition On / Ignition Off”
events.
This condition is most likely caused by, either poor/loose connection of the Qube’s ignition wire,
improper selection of a “true” ignition source, or low/drained vehicle’s battery (i.e. during
engine crank).
If the vehicle has trouble starting and/or running, advice customer to see a qualified mechanic.
If the vehicle does not have problems starting and/or running, verify that Qube’s ignition wire is
connected to a “true” ignition source and not an accessory circuit (if connected to an accessory,
AVL2 may display ignition “ON-OFF-ON” every time the vehicle is started).
Check the Qube’s ignition wire connection, if loose, move and/or rewire this connection.
Check connections at the ignition fuse holder and test ignition wire pin at the Qube’s power con-
nector.
Summary of Contents for Qube 300
Page 10: ...1 Installation and Troubleshooting Guide 10 1 4 3 GPS Cellular Combination Antenna ...
Page 12: ...1 Installation and Troubleshooting Guide 12 ...
Page 13: ...1 Installation and Troubleshooting Guide 13 1 4 6 Qube 300 Power Harness ...