1 Installation and Troubleshooting Guide
6
1.2 Recommended Installation Practices
Review this installation manual
to become familiar with all installation procedures and elec-
trical wiring requirements prior to starting the installation. This installation guide has been pre-
pared to provide you with details necessary to complete the Qube installation.
Use of proper tools and testing equipment is required. Never use a grounding style test light.
Use only a
Digital Multi Meter
(DMM) to test wires in the vehicle. It is strongly recommended
that one of the battery post cables is disconnected or battery disconnect switch is engaged prior
to making electrical connections.
The recommended method of
electrical connections
for the Qube is by soldering or “Poke and
Wrap”. “Poke and Wrap” is described in detail later in this guide. It is critical to ensure that all
electrical connections are properly insulated with quality electrical tape. Do not use butt con-
nectors, crimp connectors or any other means to connect wires. Failing to ensure proper con-
nections may result in warranty being voided and damage to the Qube and/or the vehicle.
Ensure that all
wiring
is protected from heat sources and sharp metal edges and is routed in
such manner that it will not get damaged or pinched when vehicle components and trim are
reinstalled. Run new wiring along factory harnesses and secure with quality cable zip-ties. Be
sure to leave a “service loop” near the Qube, enough slack in the wiring to allow working room
and strain relief.
The Qube is NOT waterproof, never mount the Qube in the engine compartment. When
mount-
ing the Qube
, determine best possible location under the dash and make sure that the Qube
will be securely attached using self-tapping screws or cable zip-ties. Do not force or jam the
Qube into tight places instead of mounting it. When mounting the Qube, do not obstruct any ser-
viceable areas such as fuseboxes, etc. The Qube and its wiring must be mounted away from any
moving parts such as brake, gas, and clutch pedals and linkages.
Follow all safety guidelines outlined in this guide, the applicable Qube Installation Manual as
well as those set forth by industry and government.
Summary of Contents for Qube 300
Page 10: ...1 Installation and Troubleshooting Guide 10 1 4 3 GPS Cellular Combination Antenna ...
Page 12: ...1 Installation and Troubleshooting Guide 12 ...
Page 13: ...1 Installation and Troubleshooting Guide 13 1 4 6 Qube 300 Power Harness ...