M300
1-14
NAVMAN
M300 - Setup
4.1.5 Set offset (set local time)
This option lets you adjust the M300 to display local time*. You
only need to do this once, unless operating the unit in a new
time zone. (* By default the M300 displays GPS time. The M300
will perform all functions accurately without adjusting the offset
to display your local time.)
Note: If you attempt to change the time offset before all GPS data are
obtained, the screen displays ‘no GPS’ and the antenna icon flashes until all
GPS data are received.
Access this option
If necessary, press and hold to turn the power on and enter
setup. Press repeatedly until the screen appears as shown
above.
To set local time
1) Press
to start editing (the screen now appears as shown
below). The current time value flashes. The date is displayed
to ensure that adjustments are made in the correct direction.
2) Press repeatedly to set time display forward (press and
hold to set time display forward quickly), or press
repeatedly to set time display backward (press and hold to
set time display backward quickly).
3) Press
to stop editing.
4) Press to go to the next option, or hold to exit setup.
current date
current time
SYSTEM
SET
SYSTEM
SET
PM
