background image

NavNet TZtouch3

 

FAQ 

Rev 3/4/2020 v16

 

 

1.

 

NavNet TZtouch3 System Overview 

Q1.SYS 

Which models are in the NavNet TZtouch3 product range?  

Q2.SYS 

How many NavNet TZtouch3 MFDs are allowed in one network? 

Q3.SYS 

Does one NavNet TZtouch3 MFD need to be set as a Master? 

Q4.SYS 

Which charts are pre-installed on the 256GB Micro SD-Card in TZtouch3? 

Q5.SYS 

Which PGNs are supported by TZtouch3? 

Q6.SYS  

Does NavNet TZtouch3 have a built-in operator’s manual? 

Q7.SYS 

What type of connections does the TZtouch3 MFDs have? 

Q8.SYS 

What type of connections are available on the Multi-cable port? 

Q9.SYS 

Does TZtouch3 MFDs come with built-in GPS 

Q10.SYS  

Does NavNet TZtouch3 have built in NMEA0183 functionality? 

Q11.SYS 

Does TZtouch3 have a demo mode? 

Q12.SYS 

Can I use polarized glasses with a TZtouch3 MFD? 

Q13.SYS 

Is TZtouch3 compatible with hotspot sites that require web login or authentication? 

Q14.SYS 

Is TZtouch3 compatible with the Active Captain POI database? 

2.

 

NavNet Tztouch3 Ports and Connections 

Q1.CON 

Can Engine, Tank and Fuel data be displayed on the TZtouch3 MFD? 

Q2.CON 

Is a special Ethernet Hub required for use with TZtouch3 networks? 

Q3.CON 

Can standard PC monitors be used with TZtouch3 MFDs for remote displays? 

3.

 

NavNet TZtouch3 Compatibility

 

Q1.COMP 

Can I mix TZtouch2 and TZtouch3 MFDs in a single network? 

Q2.COMP 

Are NavNet 3D and TZtouch1 networks compatible with NavNet TZtouch3? 

Q3.COMP 

Are Furuno Commercial Radars, such as the FAR2XX7, FAR2XX8, FR15X8, and FR15X3 
compatible NavNet TZtouch3? 

Q4.COMP 

Can an FCV1150 Sounder be connected networked to the

 

NavNet TZtouch3? 

Q5.COMP 

Can I control a SiriusXM Satellite Radio (audio channels) using NavNet TZtouch3? 

Q6.COMP 

Is TZtouch3 be compatible with Nobeltec TimeZero (TZ) software? 

Q7.COMP 

Are the NavNet TZtouch3’s compatible with Fusion radios? 

Q8.COMP 

Is TZtouch3 compatible with CZone Digital Switching Systems? 

Q9.COMP 

Which

 

Remote Controllers are compatible with TZtouch3 Networks? 

Summary of Contents for TZT12F











Reviews: