Page 4
Naxa Electronics
Pairing
Before using a wireless player with Bluetooth
®
,
you will need to establish a connection between
it and your Naxa device. This process is called
“pairing” and you will only have to do it once.
Once two devices are paired, they will automat-
ically connect when they detect each other.
Wireless players with Bluetooth may include
laptops, tablets, smartphones, and more. Make
sure that your player has its Bluetooth radio
enabled and that it is set to be discoverable.
After you have connected the NAB-4003:
1) The NAB-4003 will turn on automati-
cally. The Status indicator [3] will flash
quickly (searching) and then slow to a
steady rate (ready to be paired).
2) To pair, use your Bluetooth
®
device to:
a) search for the NAB-4003, and then b)
select the NAB-4003 to pair with it.
•
If your device
requires a
password,
enter “0000”.
•
Refer to the
user’s manual
of your device
for specific
instructions
for pairing
and connect-
ing Bluetooth devices.
3) Start playback on your device to start
enjoy wireless music streaming!
