Naxa NAS-3047, Instruction Manual

www.naxa.com 

Page 5

Pairing a Device with 
Bluetooth

®

A device must be paired with the speaker before using 
them together for the first time. 

When you turn on the speaker, it will automatically 
search for a paired device. If it does not detect a paired 
device, it will switch to Pairing mode (the status indi-
cator will flash blue quickly). Then:

1.  Make sure Bluetooth

®

 is enabled on your device. 

Enable it if it hasn’t.

2.  Use your device to search for available Bluetooth 

devices. (This function is usually in the Bluetooth 
settings menu; refer to your device’s instruction 
manual to learn more.)

3.  The speaker will announce itself as “

NAXA 

NAS- 

3047.” 

Select it from the list of devices.

4.  If your device asks for a passcode, use “0000” to 

complete the pairing process.

When the speaker is paired and connected to a device, 
the status indicator will light a steady blue.

⚠

L

The speaker cannot be paired with more 
than one device at a time.

Using the AUX Input 
Connector

Connect devices without Bluetooth

®

 by using the AUX 

connection. A 3.5mm stereo patch cable is required to 
make this connection.

1.  Use the included AUX cable to connect the device’s 

headphone or line-out jack to the AUX connector 
of the speaker.

2.  Turn on the device and the speaker. Lower the vol-

ume on both.

3.  Set the device volume to 80% of its maximum and 

then start playback.

4.  Press and hold 

 to gradually increase the vol-

ume of the speaker to a comfortable level.