Naxa NAS-3070, Instruction Manual

www.naxa.com 

Page 5

Pairing a Device with 
Bluetooth

®

A device must be paired with the speaker before using 
them together for the first time. 

To place the speaker in Pairing mode, press the PAIR 
button.  The  status  indicator  will  flash  blue  quickly. 
Then:

1.  Make sure Bluetooth is enabled on your device. En-

able it if it hasn’t.

2.  Use your device to search for nearby Bluetooth 

connections. (This function is usually in the Blue-
tooth settings menu; refer to your device’s instruc-
tion manual to learn more.)

3.  The speaker will announce itself as “NAS-3070.” 

Select it from the list of devices.

4.  If your device asks for a passcode, use “0000” to 

complete the pairing process.

When the speaker is paired and connected to a device, 
the status indicator will light a steady blue.

Using the AUX Input 
Connector

Connect devices without Bluetooth

®

 by using the AUX 

connection. A 3.5mm stereo patch cable is required to 
make this connection.

1.  Use a 3.5mm stereo patch cable to connect the de-

vice’s headphone or line-out jack to the AUX con-
nector [7] found on the back of the speaker.

2.  Turn on the device and the speaker. Lower the vol-

ume on both.

3.  Set the device volume to 80% of its maximum and 

then start playback.

4.  Press the + button [4] to increase the volume grad-

ually to a comfortable level.

⚠

L

The active speaker source will switch to 
AUX when a device is connected to the AUX 
connector [7]. Audio output from Bluetooth 
will be disabled while the AUX connector is 
being used.