Naxa NAS-3072, Instruction Manual

www.naxa.com 

Page 5

Using Bluetooth

®

 Mode

Pairing a Device with Bluetooth® 

A device must be paired with the speaker before using 
them together for the first time. 

Make sure Bluetooth is enabled on your device before 

attempting to pair it. 

When you turn on the speaker, it will automatically 
search for a paired device. If it does not detect a paired 
device, it will switch to Pairing mode (the Status LED 
will [9] flash blue and the speaker will bee twice). Then:

1.  Use your device to search for nearby Bluetooth 

connections. (This function is usually in the Blue-
tooth settings menu; refer to your device’s instruc-
tion manual to learn more.)

2.  The speaker will announce itself as NAXA NAS-

3072. Select it from the list of devices.

3.  If your device asks for a passcode, use “0000” to 

complete the pairing process.

When the speaker is paired and connected to a device, 
the speaker will beep and the Status LED [9] will blink 
blue slowly.

⚠

L

To enter pairing mode when the speaker 
is already on, turn it off and then back on 
again.

Bluetooth

®

 Mode Controls

When the speaker is connected to a Bluetooth

®

 device:

To do this...

...do this

Start, pause, or resume audio 
playback

Press 

.

Skip to the previous track

Press 

.

Skip to the next track

Press 

.

Adjust the volume level

Turn the Volume dial.

⚠

L

You may also use your device to control 
playback. Some devices may not support 
remote Bluetooth

®

 controls.