background image

Page 10 

Naxa Electronics

9.  Ventilation: Slots and openings in the cabinet are provided for ven-

tilation to ensure reliable operation of the product and to protect it 
from overheating. These openings should never be blocked by placing 
the product on a bed, sofa, rug, or other similar surface. This product 
should not be placed in a built-in installation such as a bookcase or 
rack unless proper ventilation is provided or the manufacturer in-
structions have been adhered to.

10.  Power Sources: This product should be operated only from the type of 

power source indicated on the rating label. If you are not sure of the 
type of power supply to your home, consult your product dealer or 

local power company. For products intended to operate from battery 

power or other sources, refer to the operating instructions.

11. 

Grounding or Polarization: This product may be equipped with a po

-

larized alternating-current line plug that has one blade wider than 
the other. This plug will only fit into the power outlet in one direction. 

This is a safety feature. If you are unable to insert the plug fully into 
the outlet, try reversing the direction of the plug. If the plug should 

still fail to fit, contact an electrician to replace the obsolete outlet. Do 
not defeat the safety purpose of the polarized plug.

12.  Power-Cord Protection: Power supply cords should be routed so that 

they are not likely to be walked on or pinched by items placed upon 
or against them, paying particular attention to cords at plugs, conve-
nience receptacles, and at the point which they exit from the product.

13.  Protective Attachment Plug: The product may be equipped with an at-

tachment plug with overload protection. This is a safety feature. See 
the operating instructions for replacement or directions to reset the 
protective device. If replacement of the plug is required, be sure the 
service technician has used a replacement plug that has the same over-

load protection as the original plug as specified by the manufacturer.

14. 

Lightning: For added protection for this product, unplug it from the 

wall outlet during a lightning storm or when it is left unattended and 

unused for long periods of time. This will prevent damage to the prod-
uct due to lightning or power-line surges.

15.  Overloading: Do not overload wall outlets, extension cords, or inte-

gral convenience receptacles as this can result in a risk of fire or elec

-

tric shock.

16.  Object and Liquid Entry: Never push objects of any kind into this prod-

uct through openings as they may touch dangerous voltage points or 

short-out parts that could result in a fire or electric shock. Never spill 

liquid of any kind on the product.

17.  Servicing: Do not attempt to service this product yourself as open-

ing or removing covers may expose you to dangerous voltage or other 

hazards. Refer all servicing to qualified service personnel.

18.  Damage Requiring Service: Unplug this product from the wall outlet 

and refer servicing to qualified service personnel under the follow

-

ing conditions: a) when the power-supply or plug is damaged; b) if 
liquid has been spilled or if objects have fallen into the product; c) if 
the product has been exposed to rain or water; d) if the product does 
not operate normally by following the operating instructions. Adjust 
only those controls that are covered by the operating instructions as 
improper adjustment of other controls may result in damage and will 

often require extensive work by a qualified technician to restore the 

product to its normal operation; e) if the product has been dropped or 
damaged in any way; f) when the product exhibits a distinct change in 
performance—this indicates a need for service.

19.  Replacement Parts: When replacement parts are required, be sure 

that  your  service  technician  has  used  replacement  parts  specified 

by the manufacturer or have the same characteristics as the original 

part. Unauthorized substitutions may result in fire, electric shock, or 
other hazards.

Summary of Contents for NAS-3076















Reviews: