Naxa NAS-3076, Instruction Manual

www.naxa.com 

Page 7

Using Bluetooth

®

 Mode

Pairing a Device with Bluetooth® 

A device must be paired with the speaker before using 

them together for the first time. 

Make sure Bluetooth is enabled on your device before 

attempting to pair it.

When you turn on the speaker, it will automatically 

search for  a  paired  device.  If  it  finds  a  paired  device, 

it will connect to it automatically, and you’re ready to 
play music from that device.

If it does not detect a paired device, it will switch to 

Pairing  mode  (the  Status  indicator  [9]  will  flash  blue 

and the speaker will emit a tone). When the speaker is 
in Pairing Mode, it will announce itself to nearby Blue-
tooth devices and accept pairing requests from them 

1.  The speaker will announce itself as “NAXA NAS-

3076.” Use your device to search for nearby Blue-
tooth devices. (This function is usually in the 
Bluetooth settings menu; refer to your device’s in-

struction manual to learn more.)

2.  Select “NAXA NAS-3076” from the list of found de-

vices.

3.  If your device asks for a passcode, use “0000” to 

complete the pairing process.

When the speaker is paired and connected to a device, 
the speaker will beep and the Status indicator [9] will 
light a steady blue.

⚠

L

To enter pairing mode when the speaker 
is already on, turn it off and then back on 
again.

Bluetooth

®

 Speaker Controls

When the speaker is connected to a Bluetooth

®

 device:

To do this...

...do this

Start, pause, or resume audio 
playback

Press 

.

Skip to the previous track

Press -.

Skip to the next track

Press +.

Adjust the volume level

Press and hold - or +.