background image

 

6

CARE OF CASSETTE MECHANISM 

Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using 

the unit. A range of cassette care products are available. 

 

 

 

 

 

 

The erase head and record/play head and the surface of the pinch roller are delicate and must 

not be touched with metal objects such as screwdrivers. You may find it easier to clean the 

assembly by pressing the PLAY button to bright head and pinch roller into view. Be sure to press 

the STOP button after cleaning the mechanism. 

Damage to the pinch wheel can occur if the unit is left in PLAY mode with the power switch off. 

Under no circumstances should you attempt to lubricate any part of the machine. 

 

USING THE CD/MP3 

Discs for Playback     

This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable 

(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs, CD-DA format digital audio 

CD, finalised digital audio CD-R/CD-RW discs. 

 

LOADING A DISC 

1.

 

Set the FUNCTION switch to CD/MP3/USB/AUX position.   

2.

 

Open the CD door. “

OP

” will be shown on the display. 

3.

 

Place an audio CD into the tray with the label side facing up. 

4.

 

Close the CD door.   

The total number of tracks will appear on the display after several seconds. 

5.

 

To remove the CD, press to open CD compartment lid, grasp the CD by its edges, and 

carefully take it out. 

Note: 

z

 

To ensure good system performance; wait until the disc tray completely reads the disc 

before proceeding. 

z

 

If no disc is loaded into the compartment, or the disc is placed upside down, the display will 

show 

PLAYING A DISC 

1.

 

Press the PLAY/PAUSE/USB button to start playback. 

The playback starts from track 1, the “          ” indicator is shown on the display. 

To interrupt playback, press the PLAY/PAUSE/USB button. The “    ” indicator and the 

current track will flash on the display. 

To resume playback, press the PLAY/PAUSE/USB button again. 

2.

 

To stop playback, press the STOP button, the total number of tracks appears

 

on the display. 

SELECTING A DESIRED TRACK/PASSAGE 
To select a desired track   

z

 

Press the CD SKIP/SEARCH NEXT/BACK button repeatedly in stop mode or during play 

until the desired track appears on the display. 

z

 

Press the PLAY/PAUSE/USB button to start play. 

 

Summary of Contents for NPB-242











Reviews: