background image

Page 14 

Naxa Electronics

Warnings and Precautions

The lightning flash with arrowhead symbol within an equilateral 

triangle is intended to aler the user to the presence of uninsulat-
ed “dangerous voltage” within the product’s enclosure that may 

be of significant magnitude to constitute risk of electric shock

The exclamation point within an equilateral triangle is intended 
to alert the user to the presence of important operation and ser-
vicing instructions in the literature accompanying the appliance.

On Protection Against Laser Energy Exposure 

• 

As the laser beam used in this product is harmful to the eyes, do not 
attempt to disassemble the casing.

• 

Stop operation immediately if any liquid or solid object should fall 
into the cabinet.

• 

Do not put anything in the safety slot. If you do, the laser diode will 
be ON when the disc compartment door is still open.

• 

If the unit is not to be used for a long period of time, make sure that 
all power sources are disconnected from the unit. Remove all batter-
ies from the battery compartment, and unplug the AC-DC adapter 
from the wall outlet. Make it a practice to remove the AC-DC adapter 
by grasping the main body and not by pulling the cord.

• 

This unit employs a laser.  The use of controls or adjustment or per-

formance of procedures other than those specified here may result in 

exposure to hazardous radiation.

CAUTION

• 

Do not block the ventilation openings or holes.

•  Do not place any naked flames (such as lighted candles) on the ap

-

paratus.

• 

When discarding batteries, follow all local rules and laws governing the 
disposal of batteries. Consider the environmental impact of your actions!

• 

Invisible laser radiation when open and interlock has failed or been 
defeated. Avoid direct exposure to beam.

•  To prevent fire or shock hazard, do not expose this appliance to rain 

or moisture.

Summary of Contents for NPB-251





















Reviews: