Page 10
Naxa Electronics
Basic Functions
Turning the Unit On and Off
To turn the unit on, set the FUNCTION switch [18] to the
RADIO or CD position. The LCD screen [2] will light up.
To turn the unit off, set the FUNCTION switch [18] to
the OFF position.
Changing Function Modes
Set the FUNCTION switch [18] to one of the function
positions (e.g., CD/RADIO).
⚠
L
To change between CD and USB modes, set
the FUNCTION switch [18] to press and hold
the key [8] while the FUNCTION switch
[18] is set to the CD position.
Adjusting the Volume
Turn the VOLUME dial [19] on the left side of the unit to
increase or decrease the volume level.
Using the Radio
Set the FUNCTION switch [18] to the RADIO position to
start using the radio.
1. Select a frequency band. Set the BAND switch [21]
to the AM, FM, or FM ST. position.
2. Turn the Radio Tuning dial [20] on the right side of
the unit to tune to a radio station.
3. Optimize radio reception:
•
Fully extend the telescopic ANTENNA [4] and
adjust its orientation to optimize FM radio
reception.
•
The AM antenna is built into the player. Adjust
the orientation and position of the player itself
to optimize AM radio reception.
⚠
L
Select the mono FM band when tuning to a
station with a weak signal. Select the ste-
reo FM ST band when the signal is strong.
The FM ST indicator will light when the
radio is tuned to an FM stereo signal.