background image

 

E-9

 

TROUBLESHOOTING GUIDE 

 

Symptom 

Possible Cause 

Solution 

Noise or sound distorted 
on AM or FM broadcast 

- Station not tuned properly for AM or 

FM. 

- FM: FM telescopic antenna is not 

extended. 

- AM: The bar antenna is not positioned  

correctly 

- Retune the AM or FM broadcast 

station. 

- FM: Extend FM telescopic antenna. 
- AM: Reposition the unit until the best 

reception is obtained. 

AM or FM no sound 

- Unit not in “RADIO” function mode. 
 
- Volume set at minimum 

- Slide Function Switch to “RADIO” 

position. 

- Increase Volume. 

CD player will not play 

- Unit not in CD function mode. 
- CD is not loaded properly.  
- If the CD is self-compiled, the media 

used may not be compatible with the 
player. 

- Select CD function mode. 
- Load CD with label side up. 
- Use better quality blank media and 

retest. 

CD skips while playing 

- Disc is dirty or scratched. 

- Wipe CD with clean cloth or use 

another disc. 

Intermittent sound from 
CD player 

- Dirty or defective disc 
- Dirty pick up lens 
 
- Player is subject to excessive shock 

or vibration 

- Clean or replace the defective disc. 
- Use a CD lens cleaning disc to clean 

the lens. 

- Relocate the player away from 

shock or vibration. 

Sound appears 
distorted at high volume 
setting 

- Volume control is set to maximum. 

- Adjust Volume Control to a lower 

comfortable level. 

- Turn off DBBS function for very loud 

music. 

 

 

FCC NOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO

THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

Summary of Contents for NPB-265











Reviews: