Naxa NPB-266, Instruction Manual

Page 12 

Naxa Electronics

To change folders, press and hold the FOLD/10 + button 
to skip to the next folder.

Programming Tracks 

Programming tracks of disc are possible when playback 
is stopped. Up to 20 tracks for CD disc and 99 tracks for 
MP3 disc can be programmed to play in any order.

1)  While playback is stopped, press the MEM/P-MODE 

[14] button to enter program mode. The display will 
flash OO and show PROG and P01.

2)  Press the  /TUN.+ button [19] to select a track.
3)  Press the MEM/P-MODE button [14] to save the 

track. The display will flash OO and show P02.

4)  Repeat steps 2 & 3 to store other desired tracks 

until all desired tracks have been programmed.

5)  Press the   /M+/  button [17] to start playback 

from the first programmed track. 

6)  Press the  /M–/ID3 button [20] to stop program 

playback.

⚠

L

To clear the program from memory, press 
the   /M–/ID3 button [20] when the disc is 
stopped or open the CD door [8].

Repeat Play Modes

Control the order in which tracks are played by chang-
ing the repeat play mode. Press the MEM/P-MODE 
button [14] during playback in order to cycle through 
the different modes; the repeat indicators shown be-
low will appear on the display.

Repeat. Repeat the current track only.

 ALL

Repeat all. Repeat all tracks.

 DIR

Repeat directory. Repeat all tracks in the current 
folder. (This mode is only available when playing 
MP3 file sources that have more than one folder.)

RAN

Random. Play tracks in random order.

INTRO

Intro. Play the first 10 seconds of each track.

To cancel repeat play mode and return to normal play-
back, press the MEM/P-MODE button [14] until all of 
the Repeat indicators disappear from the display.