www.naxa.com
Page 13
Listening to USB
Connect a USB memory device to the USB port [4] found
on the top of the unit, then press the STANDBY/FUNC.
button [15] to select “USB” mode. The display will flash
“READING” and then playback will start automatically
the first track.
⚠
L
Connect USB memory devices directly to
the USB port of the boombox. Do not use
a USB extension cable or hub as these may
introduce interference that will result in
abnormal performance.
About USB Drives
This player can play supported audio files from USB
stick drives connected to the USB port [4]. For a list of
supported audio files, please refer to the Specifications
section of this manual.
The file system of the USB drive must be formatted
as FAT or FAT32. Other file systems are not supported.
The unit will not work with computers connected to
the USB port. This USB port is not designed for devices
that require a lot of power (e.g., USB hard drives or disc
drives).
⚠
L
There are many different USB stick types
and manufacturers. Although this player
should support most of these memory
devices, it is impossible to guarantee com-
patibility with ALL USB drives. If your USB
device can be turned on, turn it on when
using it with the player.
USB Operation
1. To start, pause, or resume playback, press the /
M+/ button [17].
2. To stop playback, press the /M–/ID3 button [20].
⚠
L
Program playback and repeat playback
modes work the same way during USB
playback as during CD playback. Please
refer to section “CD/MP3 OPERATION” to
learn more about these modes.
Summary of Contents for NPB-266
Page 21: ...www naxa com Page 21 ...
Page 22: ......
