Naxa NPB-266, Instruction Manual

Page 14 

Naxa Electronics

Bluetooth

®

 Operation

1.  When you set the Boombox to Bluetooth mode (by 

press the  /FUNC. button [15]) and it does not de-
tect a paired device, it will automatically switch to 
pairing  mode.  (The  display  will  flash  “Bluetooth” 
and the blue “PAIR” indicator will blink when the 
Boombox is in pairing mode.) If connection fails, 
the PAIR indicator will keep flashing. 

2.  Press the  /FUNC. button [15] to select BLUETOOTH 

mode. The boombox will attempt to connect to a 
paired Bluetooth® audio device. If a paired de-
vice  is  not  detected,  he  PAIR  indicator  will  flash 
rapidly; the boombox is ready to be paired with a 
Bluetooth® device. If this is your first time using a 
Bluetooth device with the boombox, complete the 
steps below to pair them together.

3.  Make sure Bluetooth is enabled on the Bluetooth 

device. Use the device to scan/search for other 
Bluetooth devices (i.e., the boombox). 

4.  Select “ NAXA NPB-266 ” from the results. Use the 

password “0000” if the device asks for one. The 
PAIR indicator will light blue when the connection 

is complete

5.  Press the  /M+/  button [17] to start playback. 

You can also control playback with your device. 

6.   Press the   [13] or   [11] buttons to adjust the 

volume level.

⚠

L

Note: The Bluetooth works best within 10 
meters.

To disconnect an Bluetooth device from the 
boombox, press and hold the  /M+/  until 
the PAIR indicator flashes blue.

To learn more about how to use the Blue-
tooth audio function of your device, please 
refer to the instructions provided by the 
device manufacturer.