background image

 

- 5 - 

 
 

Built-in microphone recording 

1.  Insert cassette as previously described. Press 

RECORD(the

  PLAY

  button is depressed with it).You 

are now recording. If the RECORD button does not 
depress, see“PREVENT ACCIDENTAL ERASURE”. 

2.  Talk normally into the BUILT-IN CONDENSER 

MICROPHONE. To obtain optimum recording quality, 
place the recorder with the microphone freely exposed 
and as close as convenient to the sound source. 

3.   

NOTE: 

The automatic level control(ALC)will set the record 

level for optimum recordings,regardless of volume setting. 
 

Automatic stop 

When your recorder is operating in PLAY or RECORD 
mode and the end of the tape is reached, your unit will 
automatically shut itself off and return the buttons to the 
OFF position. 
 

Stand-up microphone recording 

The record with stand-up microphone, plug the microphone 
into the 

MICROPHONE

  jack and follow the built-in 

microphone recording instructions. When the stand-up 
microphone is used,the built-in microphone is automatically 
disconnected. 

 
Tape erase 

To erase a tape simply record over the unwanted recording. 
 

Summary of Contents for NPB-300












Reviews: