background image

Press the     /al.off button to turn off the alarm off 

when it sounds.

CD Player Operation

Turning OFF the Alarm

1. 

Slide the Radio/Buzz/CD switch to “CD” 

position. 

Open the CD door and insert a CD into the 

tray with the printed label facing up. 

2.

Close the CD door. 

3.

 

4.

Turn On the unit by pressing the     /al.off

button. 

5.

The disc will begin to spin, then the LED 

will display the total number of tracks. 

6.

Press the      button to play the first track.     

7. 

To pause the CD while in playback, press the

     button. Press again to resume playback.  

Press the “CD disp” button to show the 

track number in CD mode. 

How to Set the SLEEP TIMER

1. 

Slide the Radio/Buzz/CD switch to “Radio” 

or “CD” position. 

Adjust the volume control.

2.

Press the SLEEP button. The number 90 will

appear on the clock display. 

3.

 

4.

Repeatedly press the SLEEP button to cycle 

through the available pre-set lengths of time;

90, 80, 70, 60, 50, 40, 30, 20, 10, and 0 minutes.   

5.

To cancel the sleep time before it expires, simply

press the     /al.off or press the SLEEP button 

repeatedly to set sleep to 0.

6.

The unit will automatically switch off when the 

SLEEP time expires.            

Page 8  

Naxa Electronics

Summary of Contents for NRC-176














Reviews: