background image

 

 

9

 

 

CONNECTIONS 

 
Speakers 

◆ 

Connect the black wire of the left speaker to the black terminal marked “L-“on the rear of the main 
unit . 

◆ 

Connect the white wire of the left speaker to the red terninal marked”L+” on the rear of the main 
unit. 

◆ 

Connect the black wire of the right speaker to the black terminal marked “R-“ on the rear of the 
main unit . 

◆ 

Connect the white wire of the right speaker to the red terminal marked”R+” on the rear of the main 
unit. 

 

Power 

This unit runs on AC 120V power . 
1.  Plug the power cord into an AC wall outlet . 
2.  To turn the player on , press the 

POWER

 button to power on the unit.   

 

Remote Control 

 

◆ 

Refer to the diagram .Remove the 

                                 

 

battery compartment cover located 
on the front of the remote control. Insert 
2

 ×

”AA” batteries ,making sure to match   

Their polarities (+/-)to the markings on the   
Side of the compartmetn .Replace the cover.

 

◆ 

To use the remote ,point it at the remote sensor   
Of the player . Operate the remote within 15 feet   
Of the sensor and at an agle of +/-60 degrees.

 

◆ 

Batteries in the remote will last for approximately 6 months under 
Normal use. Replace the batteries if the remote control does not work. 
Do not mix old with new batteries ,or differents types of batteries.

 

◆ 

Remove the batteries from the remote if it will not be used for a long 
Period of time. 

 

▲ 

The battery used in this device may present a fire or chemical burn   

if mistreated .Do not recharge ,disassemble ,incinerate ,or heat the battery(-21

F) 

Keep battery away from children . 

 

 

 

 

 
 
 

Summary of Contents for NSM-436


















Reviews: