Naxa NT- 90A, Instruction Manual

Page 14  

Naxa Electronics

5.  Audio Only: Press the “OK” key to enter the menu

to select, “close the image signal.” Only audio will
be heard as the image will disappear.

Time

1.  Clock: Press the “OK” key to enter the menu then

the Up/Down to select; then press the Left/Right 
keys to adjust the current date and time.

2.  Off Time: Press the “OK” key to enter the menu 

then Left/Right arrow keys to set a day and time
to auto shut off the TV.  

3.  On Time: Press the “OK” key to enter the menu

then Left/Right arrow keys to set a day and time
to auto turn on the TV.

4.   Sleep Timer: Set a timer. the TV will turn off 
       automatically at the end of the timer. 

5.    Auto Sync: Set the system time to match the time

       carried by the antenna signal (cable or air). This 

       option is not adjustable. The TV must be connected

       to an antenna or cable system for Auto Sync to work.

6.   Time Zone: Set the time zone adjustment to match
       your location. 

Option

1.  OSD Language: Set the display language of the 

onscreen menus. 

2.  Closed Caption: When closed caption is availabe

for a TV program, a synchronized transcript of the 
program can be displayed on screen. 

•

Select Off to never display the closed caption 
information.

•

Select On to always display the closed caption 
information.

•

Select CC on Mute to only display the closed 
caption information when MUTE is enabled.

3.  Setup Wizard: An on-screen guide that will help

you get your TV up and running. Set the menu 
language, time zone, DST, and time format. Then, 
it scans all the channels to find all stations within 
broadcast range. 

4.   Restore Factory Default: Return all options to their
      factory setting

5.   TTS (Text to Speech): Converts normal language 
       text to speech.