Naxer
Tech
Limited
8 |
P a g e
B.
Security Commands:
Security Commands offer such commands to be sent to the tracking unit to enable/ disable features that the tracking unit offers.
Let’s discuss each Security command in detail:
Format
%PULSEOUT,3,1
%PULSEOUT,3,1
When the unit receives the command, it will Lock the vehicle’s doors and send a confirmation
SMS text format to the number which sent the command.
(Only for authorized numbers)
Unit Response:
Doors Locked
Format
%PULSEOUT,2,1
%PULSEOUT,2,1
When the unit receives the command, it will Unlock the vehicle’s doors and will send a
confirmation SMS to the number which sent the command.
(Only for authorized numbers)
Unit Response:
Doors Unlocked.
Format
%ARM
,
1
%ARM,1
When the unit receives the command, unit will turn on the Security Mode, Engine will be
turned off and doors will be locked. Unit will send a confirmation SMS and GPRS message to
base and any users’ contacts if defined.
In ARM’d mode unit will monitor Ignition, doors and motion. If Ignition is turned on, or doors
open or and motion is sensed, it will generate alerts and will sound hooter (if configured).
Unit Response:
Security Mode enabled. Engine Killed. Doors Locked.
Format
%ARM,0
%ARM,0
When the unit receives the command, unit will turn off the Security Mode, Engine will be
released and doors will be unlocked. Unit will send a confirmation SMS to base and three users
contacts if defined
Unit Response:
Security Mode disabled. Engine Released, Doors unlocked.
Extended ARM commands
Format
%ARM,0,x
%ARM,0,x
When the unit receives the command, unit will turn on the Security Mode with extended ARM
option and unit will send a confirmation SMS to Control Base and authorized contact numbers.
In below example, Security Mode will be turned on with bit 2 and bit 3 activated which will turn
ON Hooter output and will generate SMS text message if illegal action is performed.
Example
%ARM,1,6
Unit Response:
Security Mode enabled.
A complete table of values given below for the possible values of x parameter.
Bit 3
Bit 2
Bit 1
Result (values for x parameter)
0
0
0
0 – No option enabled.
0
0
1
1 – Immobilize Engine only.
0
1
0
2 – Hooter on only.
0
1
1
3 – Immobilize Engine with Hooter On.
1
0
0
4- SMS only.
1
0
1
5 – Immobilize Engine with SMS.
1
1
0
6 – Hooter on with SMS.
1
1
1
7- Immobilize Engine, Hooter on & SMS.
Bit 1-
Engine Immobilize
, Bit 2 –
Hooter
, Bit 3 –
SMS
