Getting Started with MAXserver Access Servers
0038
128
Troubleshooting
Refer to this section if you experience a problem with your MAXserver. This
section describes:
·
How to troubleshoot startup and loading problems
·
What to do if the LAN light on the front panel goes out
·
How to reset the MAXserver
Startup/Loading Problems
Refer to this section if you have powered up the MAXserver or re-initialized
the unit and the front panel lights do not behave as follows after several
minutes:
·
RUN light flashes slowly
·
LAN light flashes as Ethernet packets are received
Normally, the light pattern appears as follows when you power up the
MAXserver, or re-initialize the unit:
9.
All lights ON for approximately one second. (The MAXserver is testing
the lights.)
10.
Each port light goes ON in order – left most to right most. (The
MAXserver is running a self test.)
11.
The RUN light flashes rapidly. (The self test has completed.)
12.
The LAN light goes ON. (The MAXserver is starting the software
loading process.)
