2
www.nc-link.cn
Power Button
: To power
ON
/
OFF
of the device
The default IP address is
192.168.188.253
Default user name & password are
admin
RJ45 Connector
NC-AP233P with 1 x 10/100Mbps auto-negotiation RJ45 LAN Port
NC-AP233 with 1 x 10/100Mbps auto-negotiation RJ45 LAN Port
NC-AP231 with 1 x 10/100Mbps auto-negotiation RJ45 LAN Port
WAN
: The WAN port is used to connect to the power and Internet
NC-AP233P with 1 x 10/100Mbps auto-negotiation RJ45 WAN Port
NC-AP233 with 1 x 10/100Mbps auto-negotiation RJ45 WAN Port
NC-AP231 with 1 x 10/100Mbps auto-negotiation RJ45 WAN Port
3.
Login
Connect your PC to the In-Wall Access Point’s
LAN Port
, then login Web
Management Page with default IP Address:
http://192.168.188.253
Default username & password:
admin
. Below base on
Chrome
browser.
Note:
Before login the Web Management Page, configure your PC with a fixed IP
address, 192.168.188.X (X between 2 to 252) since default mode is AP
Mode.
Login Steps
:
O
pen Chrome browser, input
http://192.168.188.253
in the address bar to login
Access Point
Input the default user name & password:
admin
, then click
“
Log In
”
Summary of Contents for NC-AP233(P)
Page 1: ...User Manual of NC AP233 P NC AP231 Version V1 0...
Page 4: ...3 www nc link cn After login you can see below Web page Default operating mode is AP Mode...
Page 10: ...9 www nc link cn c Then Apply and click OK to complete the configuration...
Page 12: ...11 www nc link cn 7 1 2 Wi Fi Status 7 1 3 LAN Status...
